Tekonsha 7-Way Trailer Wiring Kit + Brake Control For 08-14 Ford Econoline offres Van

TEKONSHA 118551 T-One® T-Connector Custom Harness, 4-Way Flat, w/Circuit Protected ModuLite® HD Module (QTY 1)

Manufactured by: Tekonsha

Tekonsha® T-One® connector (also referred to as T-Connector) wiring harnesses are the fastest and easiest way to add an electrical connector to the back of your vehicle These connectors are used to link the wiring from your vehicle to the trailer when towing Tekonsha T-One connectors feature custom designs to fit each vehicle make and model based on manufacturer specifications.

Plus, the Plug & Play connectors on the end of the wires make it easy to install No cutting or splicing!Tekonsha offers the largest, most complete line of T-One connectors To install a Tekonsha T-One wiring harness, simply locate your vehicles wiring harness connector typically behind the vehicle taillight - unplug the connection and insert the T-Connector into the vehicles harness.

Its that easy! So what are you waiting for? Hit the road with the peace of mind only Tekonsha can provide Lifes a Journey Stop Often..

REESE TOWPOWER 85343 Wiring Adapter, 7-Way Flat to 4-Way Flat (QTY 1)

Manufactured by: Reese Towpower

REESE Towpower dual port adapter offers the most convenient way to up-grade your vehicle from a standard 4-way flat connector to have both the versatility of a 4-way flat along with the capabilities of the 7-way round connector The simple wiring converts the vehicles 4-way flat to a flexible, two port connector, offering both the 4-way flat, 7-way round connector..

TOW READY 20506 Trailer Brake Controller Installation Kit, Vehicle and Trailer, Wiring Only (QTY 1)

Manufactured by: Tow Ready

Includes all necessary parts required to completely install all brake controls No other parts are necessary..

Used in 6, 12 and 24V DC applications. Automotive, R.V., air conditioners, battery chargers, any application requiring over-current protection. Non-corrosive molded cover eliminates grounding when operating against a fault line. Includes mounting bracket and installed nuts and washers.(QTY 1)

Manufactured by: Tekonsha

Used in 6, 12 and 24V DC applications Automotive, R.V., air conditioners, battery chargers, any application requiring over-current protection Non-corrosive molded cover eliminates grounding when operating against a fault line.

Includes mounting bracket and installed nuts and washers..

Features:

• Current rating: 30 Amp
• Number of terminals: 2
• Voltage compatibility: 6 V, 12 V, 24 V
• Terminal type: Threaded
• Terminal gender: Male

TEKONSHA 90885 Prodigy® P2 Proportional Brake Controller for Trailers with 1-4 Axles, Gray (QTY 1)

Manufactured by: Tekonsha

The Tekonsha Prodigy P2 electric trailer brake controller is a small device with a big responsibility As one of the most popular and most trusted brake controllers on the market, this proportional brake controller utilizes primary sensor technology to provide a smooth braking response in any stopping situation The Prodigy P2 has an easy-to-use knob so you can effortlessly set the power output to your desired braking power, a boost feature that lets you apply up to three levels of additional braking power, especially when hauling heavier loads, the choice of electric or electric over hydraulic braking, and manual override to help you brake safely when an unexpected stop pops up.

The P2 also has an LED digital display so you can monitor your settings and trailer braking activity and a power-save mode to reduce battery drain when not in use This intuitive brake controller can easily be positioned on top of or under the dash, with your choice of a mounting bracket or mounting pocket and is self-leveling when mounted within a 90-degree vertical range, so there's no need to adjust the unit once it's installed When you're done towing, the P2's snap-in dash mounting clip, Plug & Play port for two plug adapters, and removeable electrical connector allow the unit to be quickly stored.

The Prodigy P2 truly is a complete trailer brake controller kit It works with trailers with 1-4 axles, comes with all the mounting hardware needed for installation, and is backed by a limited lifetime warranty..

TEKONSHA 303500 Trailer Brake Controller Custom Harness, Vehicle & Brake Control Ends (QTY 1)

Manufactured by: Tekonsha

Tekonsha trailer brake controller harnesses exist to make connecting your brake controller to your vehicle as easy as possible These custom two-plug units are specifically designed to be used with any Tekonsha brake controller The Plug & Play feature on the Tekonsha wiring harnesses makes them easy to install.

Simply plug one end of the harness into the back of your desired Tekonsha brake controller and the other end into the port in your vehicle No cutting, splicing, or taping required.Each wiring harness is made up of four copper wires wrapped with a braided nylon thread to insulate the wires and protect them against nicks, punctures, and elevated temperatures The four-pin Plug & Play connectors on each end of the harness are uniquely designed, with one end to fit each vehicle based on make and model year specifications, while the other end plugs easily into any Tekonsha brake controller.Tekonsha trailer brake controller harnesses are custom designed, giving you plenty of wire to reach between where it is connected to the vehicle and where it connects to the brake controller without stretching or straining the wires.

And because Tekonsha is the leader in wiring and electrical, you can relax knowing your connections will be safe and secure, so you can hit the road with confidence! With Tekonsha, Life's a Journey Stop Often..